Cart

Your Cart is Empty

Back To Shop

Category: -Speakers New

Speakers all new

Showing 1–12 of 16 results

  • Atlas IED SD72 Ceiling Speaker

    $14.00

    8″ Dual Cone In-Ceiling Speaker with 25V/70V 5-Watt Transformer

    Model SD72 is a dual cone, 25 watt 8″ (205mm) speaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion. The speaker is also equipped with a full 1″ diameter copper voice coil with a black anodized aluminum former for better power dissipation.

    Model SD72 operates within a frequency response range of 45Hz – 19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

    The unit mounts a wide variety of AtlasIED round and square baffles and enclosures (not included) to meet functional and aesthetic application requirements.

    Features:

    • 5 Watt-Dual Voltage Transformer
    • Individually Packaged for Stocking & Ordering Convenience
    • Quality 10oz Dual Cone Speaker Provides Familiar Response & Performance
    • ETL Certified, Safety Listed to UL1480

    *This price is limited to stock on hand.

     

    Tax excluded Delivery time will be assessed once a shipping method is quoted and payment in full is verified.

    Add to cart
  • Community D6 Ceiling Speaker pr

    $180.00

    Community D6 6.5″ 2-Way High Output Ceiling Speaker 8 ohm or 70V/100V

    Available in standard white or black finish, the powerful and versatile D SERIES D6 provides high-quality paging and musical performance suitable for retail environments, restaurants, resorts, and numerous other applications where the importance of sonic quality cannot be ignored. Particularly effective when supported by the D10SUB, a D6 system is capable of meeting demanding needs at a cost usually associated with much smaller loudspeakers.

    Add to cart
  • Community D8 speaker assembly

    $195.00

    Community D8 Features:

    • High intelligibility with exceptional uniform coverage
    • Consistent, wide dispersion up to 16 kHz
    • True coaxial loudspeakers with HF compression drivers
    • Tru-Phase™ high-frequency waveguide
    • Patented Carbon Ring Cone Technology™
    • Spring loaded Drop-Stop™ installation assistant tabs support the back can on the included rails and C-ring to simplify installation
    • Uniquely designed tile bridge support rails and snap-on C-ring support plates prevent sag
    • Twist-Assist™ loudspeaker face retainer tabs for fast and easy installation
    • 3/4″ and 1″ knock-outs on the sides of the back can
    • External loop-through Euroblock connectors
    • Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
    • Selectable 8 Ohm or 70V/100V operation
    • Back can and face-only packages available
    • Five year warranty
    Add to cart
  • Community ENT206W 2-way Compact Column Array Loudspeaker

    $295.00

    Community ENT206W 2-way Compact Column Array Loudspeaker – 8 ohm / 70V/100V – White

    The Community Pro ENT206 is an all-weather, column array loudspeaker housed in an attractive, heavy duty extruded PVC enclosure. Double the height of the smaller ENT203, the ENT206 provides directional control at significantly lower frequencies than the ENT203, along with enough power to effectively cover much larger areas while still remaining unobtrusive. Ideally suited to applications such as music and speech reinforcement for reverberant houses of worship, hotel lobbies, assembly rooms, transit stations, indoor/outdoor swimming pools, outdoor smoking areas, bowling alleys, and much more, the ENT206 is a solid performer that belies its small size. Like the ENT203, the ENT206 also can be utilized to support larger systems for delay and area fill. The ENT206 employs six high-power LF cone drivers and two Community CRE (Compact Ribbon Emulator) HF tweeter arrays in a two-way, single-amped configuration

     

    Add to cart
  • EAW CIS400 flush-mount loudspeaker

    $165.00

    The CIS400 is supplied fully assembled, complete with a sealed zinc-coated steel backcan and cam-style installation clamps. The metal enclosure includes a recessed Euroblock input connector with detachable mating plug, concealed behind a hinged metal cover plate. A welded tab is provided for seismic restraint. Two steel T-Bar support channels are provided to facilitate installation to a standard tile ceiling. Also supplied is a steel split C-ring, which serves to disperse the clamping pressure of the mounting cams.

    • 6.5 inch cast steel basket, high-efficiency carbon fiber woofer
    • 110º x 110º constant directivity horn with Ferrofluid® cooled, 1″ Neodymium dome  tweeter
    • Built-in LICC low-inductance passive crossover with high frequency dynamic protection
    • Lightweight, UV/weather resistant, high density polystyrene
    • Integrated mounting system and hardware included UL/cUL/CE listed
    Add to cart
  • EV C8.2HC Ceiling Speaker

    $195.00

    EVID C8.2HC

    8″ enhanced pattern‑control 2‑way coaxial ceiling loudspeaker

    • Maximum fidelity and intelligibility for high ceilings
    • Ported enclosure for extended bass response
    • Waveguide-coupled 1-inch titanium-coated tweeter
    • Full-bandwidth overload protection
    • Integrated transformer for 70 V, 100 V, or 8 Ω use
    • Front-panel mode/wattage selector
    • Safe, easy installation with included tile bridge and mounting ring
    • White semi-gloss perforated grille
    • Complete package, requires no additional accessories
    Add to cart
  • JBL 2241HPL 18″ Speaker

    $395.00

    18″ JBL 2241H, HPL, 8 Ohms Speaker

    Features

    • 600 W continuous pink noise power capacity
    • 8 ohm impedance
    • 100 mm (4 in) edgewound aluminum ribbon voice coil
    • 30 Hz-3 kHz response
    • 98 dB sensitivity, 1 W. 1 m (3.3 ft)
    • SFG magnet structure with Vented Gap Cooling™ technology
    • Net weight: 10.7 kg (23.5 lb.)
    Add to cart
  • JBL CBT4 Tweeter Array (Referral) 195.00

    https://allstar-show.com/contact-equipment-listing-inquiry-and-referral

    A Referral is equipment owned and sold by a third party owner. Allstar will send you the contact information after you fill out the contact form.

    Read more
  • JBL Control 25-1

    $195.00

    Contol 25 1

    Features

    • Components:
      • 5-¼” woofer with woven fiberglass cone
      • 3/4” PEI diaphragm tweeter with fluid cooling
    • Contemporary, high-design appearance
    • Built-in InvisiBall® mounting hardware*, plus available U-bracket
    • Weather resistant enclosure and transducers
    • Wide 100° x 100° coverage
    • 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
    • High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.
    Add to cart
  • JBL Control 25-1 White ea

    $195.00

    Contol 25 w1 white

    Features

    • Components:
      • 5-¼” woofer with woven fiberglass cone
      • 3/4” PEI diaphragm tweeter with fluid cooling
    • Contemporary, high-design appearance
    • Built-in InvisiBall® mounting hardware*, plus available U-bracket
    • Weather resistant enclosure and transducers
    • Wide 100° x 100° coverage
    • 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer.
    • High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.
    Add to cart
  • JBL Control 26-DT 6.5 Inch Ceiling Speaker

    $70.00

    JBL Control 26-DT 6.5″ Ceiling Speaker Specifications

    • Use instead of standard 8″ driver. Fits standard backcans for 8″ speakers
    • Comes complete with transducer, network and transformer
    • Advanced crossover network provides natural sound and even coverage throughout listening area
    • 60 W transformer for 70 V or 100 V distributed speaker lines
    • Coaxial woofer with long-life butyl rubber surround and titanium coated tweeter

    *This price is limited to stock on hand

    Read more
  • JBL Control HST

    $350.00

    Wide-Coverage Speaker with 5-1/4″ LF, Dual Tweeters and HST Technology™

    SPLAYED TWEETERS

    The dual tweeters feature aluminum diaphragms with a CMMD treat, polyurethane surround, a neodymium magnet, and fluid-cooling for high output, low distortion and humidity resistance.

    WALL FACING WOOFER

    The well-damped woofer incorporates a CMMD ceramic metal matrix diaphragm for a very high stiffness-to-weight ratio, high output, resistance to humidity and long-term durability.

    CONTROLLED SOUND

    Engineered noise cancelling allows Control HST to provide a flatter resulting frequency response along with a more consistent sound character throughout the room.

    Read more

Cart

Your Cart is Empty

Back To Shop