Category: AUDIO
Showing 25–36 of 49 results
-
Middle Atlantic SPN-44-312: 395.00 1. available Rack Side Panels
[wpforms id="87" title="true"]Read moreRack Middle Atlantic Side Panels MRK-4431 / WRK-44-32 (Pair)
The Middle Atlantic SPN Universal Side Panels SPN-44-312 fit all Middle Atlantic WRK, MRK, VMRK and VRK, Series enclosures. These side panels feature stylish beveled corners to match the aesthetics of the enclosure. They easily lift off and include an internal locking kit. These panels feature a black, textured, powder-coat finish and are sold in pairs. This model is designed for use with 44U, 31″ and 32″ deep cabinets.
The Middle Atlantic SPN Universal Side Panels SPN-44-312 fit all Middle Atlantic WRK, MRK, VMRK and VRK, Series enclosures. These side panels feature stylish beveled corners to match the aesthetics of the enclosure. They easily lift off and include an internal locking kit. These panels feature a black, textured, powder-coat finish and are sold in pairs. This model is designed for use with 44U, 31″ and 32″ deep cabinets.
-
Middle Atlantic SS sliding shelf: 165.00 – 3. available
[wpforms id="87" title="true"]Read moreThe Middle Atlantic SS sliding shelf is both functional and rugged. Capable of latching in an open or closed position, the shelf slides on ball bearings and extends a full 13” and mounts to any rack (rear rackrail required in steel racks). Occupies slightly more than a single rackspace. NOTE: Fits in racks with a minimum 15-1/8” from front to rear rails.
- High 50 lb. capacity, with rugged ball bearing slides
- Latches open or closed, with 13” extension
- Note: occupies slightly more than one rackspace
- Adjustable rear support to mount in most racks (15.1” to 23.9” range)
- Steel construction with black powder coat finish
Dimensions
- Mounting Depth Max: 23.9
- Mounting Depth Min: 15.1
- Usable Depth: 13
- Capacity Weight (US): 50
- Depth (US): 15.67
- Height (US): 2.44
- Width (US): 20.12
-
Nexo GEO-BRIDLE: 45.00 – 4. available
Read more(GEO-BRIDLE) 2 LEG CHAIN BRIDLE FOR ONE RIGGING POINT MODE
Features
- 2 Leg Chain Bridle
- For One Rigging Point Mode
- Black
-
Ortofon twin stylus – 195.00 – 2. available 2 pack – turntable stylus pkg
[wpforms id="87" title="true"]Read morehe general purpose Ortofon Concorde MKII MIX Twin combines a pair of turntable cartridges, which boast solid performance and durability. The spherical styli and solid cantilevers provide reasonable output, high-quality sound, and solid tracking for any style of music. The cartridges offer transparent sound across the entire audio spectrum. The Ortofon Concorde MKII MIX Twin ships with two protection guards, a dust brush, and a flight case.
- General purpose cartridges for any style of music
- Accurate sound reproduction
- Solid groove handling
- Spherical stylus with highly-balanced cantilever
- Reasonable output
- Transparent sound
- Accurate sound reproduction
-
QSC MP-MFC wall mount controller: 295.00 – 1. available
Read more[wpforms id="87" title="true"]
Wall mount controller for MP-M Series mixers
Features
- For use with the MP-M paging and music mixer/processor only
- Control zone source selection, zone output level, input level selection and scene recall
- Crisp 27 mm x 26mm monochrome graphic display and three buttons (increment, decrement, select)
- Ability to daisy chain up to four MP-MFC controllers
- Up to 250 m cable length (CAT5)
- Up to eight MP-MFC controllers per MP-M Series mixer
- Available in black or white
- Available in NA and EU sizes
-
Radial Engineering IceCube: 55.00 – 2. available IC-1 Balanced Line Isolator and Hum Eliminator
Read more[wpforms id="87" title="true"]Designed to eliminate hum and buzz cause by ground loops, the IceCube IC-1 Balanced Line Isolator and Hum Eliminator from Radial Engineering can be inserted directly into your signal path via its glass-filled nylon XLR connectors. Its proprietary Eclipse transformer isolates the input from the output and blocks stray DC currents, providing a linear response from 20 Hz to 18 kHz. It can handle up to +10 dB at 20 Hz with less than 0.01% distortion.
The IceCube is made of solid 16-gauge steel and features a powder-coat finish. The steel provides electromagnetic shielding from nearby cables, motors, and power supplies.
Eliminates hum & buzz caused by ground loopsLinear response from 20 Hz to 18 kHzAble to handle pro output levels without chokingPlug & play easy to use with XLR in & out -
Rapco Horizon CVPBLOX: 43.00 – 1. available Volume BLOX Volume Control Pad
Read more[wpforms id="87" title="true"]Key Features- In-Line Volume-Control Pad
- Continuously Variable Control
- Compact and Rugged Design
- Potentiometer with Knob
- XLR Input / XLR Output
-
Sennheiser 076612: 18.00 – 12. available Short Black Inlet Cap for MZC, MKE2, HS2
[wpforms id="87" title="true"]Read more -
Sennheiser 18.00 – 12. available 572232 Short Beige Inlet Cap for MZC, MKE2, HS2
[wpforms id="87" title="true"]Read more -
Sennheiser 572231: 18.00 – 12. available Long Black Inlet Cap for MZC, MKE2, HS2
[wpforms id="87" title="true"]Read more -
Sennheiser 74646 cap: 18.00 – 12. available Long Beige Inlet Cap for MZC, MKE2, HS2
[wpforms id="87" title="true"]Read more -
Sennheiser E904 Cardioid Drum Microphone
Read moreThe Sennheiser E904 is a cardioid instrument microphone primarily designed to reproduce drums and percussion instruments with incredible richness and detail. The E904 features a dynamic element with a cardioid polar pattern that reduces off-axis signal and residual noise. The E904 provides high headroom and low distortion when capturing signals at excessive sound pressure levels. The element responds to very fast attacks with extreme accuracy, without distortion. The E904 is an excellent choice for capturing snare drums, toms, congas, and more.