Category: VIDEO
Video All
Showing 1–12 of 15 results
-
Chief PG2A Small Projector Security Cage
$495.00Add to cartKey Features
- Directly compatible with RPA & RPM, projector mounts
- Also attaches to 1″ & 1.5″ NPT diameter poles for use with RSM, & RSA projector mounts
- Fully encloses projectors in a locked steel cage to protect from theft or recreational damage
- Saves unnecessary costs and hassles caused by projector mount theft
- Mount with pre-existing installations without disturbing projector settings
- Adjustable front opening accommodates different lens positions
- Hinged door for easy access
- Accommodates roll, pitch and yaw adjustments
- Locks with security screws
- Additional security available with optional padlocks
-
Crimson JR-2 Universal mount for projectors
$145.00Add to cartJR2
Universal mount for projectorsTwo-piece design for easy installation via click-in-place quick release. A total of 12 adjustment points; 6 for pitch and 6 for roll to ensure that projector stays in place and does not slip after installation.- *Low-profile, holds projector close to ceiling for a subtle appearance
- *Completely pre-assembled mounting interface for quick installation
- *Fully adjustable roll, pitch and yaw
- *12 total adjustment points; 6 for pitch and 6 for roll
- *Quick release mechanism allows for easy service of projector (video projector ceiling mounts)
- *Mounts to any 1.5″ NPT threaded pipe
- *Pre-sorted hardware pack for easy installation
Please use E-Z mount finder to verify compatibility -
Draper Targa 116014 Motorized Screen
$495.00Add to cartDraper Motorized Screen: 116014 Targa 84 diag. (50×67) – Video [4:3] – Matt White XT1000E 1.0 Gain
Open Box
Supported Resolution:1080PScreen Type:ElectricMount Type:Wall and CeilingFormat:Video [4:3]Brand:DraperViewable Diagonal in.:84Viewable Width in.:67Viewable Height in.:50Surface Color:WhiteProduct Status:DiscontinuedGain:1.0Case Color:WhiteProduct Line:TargaFront/Rear Projection:FrontProjection Surface:Matt White XT1000E -
Kramer 4K HDR RS-232 IR
$295.00Add to cartHDMI Receiver with RS-232 & IR over HDBaseT
Key Features- Extend HDMI Video over HDBaseT
- Extend 4K30 4:4:4 HDMI Video up to 230′
- Extend 4K60 4:4:4 HDMI Video up to 130′
- HDCP 2.2 and EDID Compliant
- Data Rate up to 18 Gb/s
- Supports CEC/IR/RS-232 Pass-Through
- Dolby TrueHD & DTS Master Audio Ready
- Supports Uncompressed LPCM Audio
- 1 x 3.5mm Jack for IR
- LED Indicator Lights & Mounting Bracket
-
Kramer PT-572+ HDMI receiver
$225.00Add to cartHDMI HDCP 2.2 Compact Receiver over PoC Long–Reach DGKat
-
Mitsubishi OL-XD2000LZ Long-Throw Conversion Lens
$195.00Add to cartMitsubishi OL-XD2000LZÂ Overview
The Mitsubishi OL-XD2000LZ is a long-throw conversion lens that provides a 2.2-2.9 throw ratio when attached to the original standard zoom lens of the Mitsubishi XD1000U and XD2000U. Offers motorized focus and zoom when attached to the original lens.
Long-throw conversion lens for attachment to standard zoom lens1.3-1.6″ (32.4-40.5mm) focal length, F2.1-2.4Motorized focus and zoom when attached to the original lens1:1-12:1 vertical shift and +/-10% horizontal shift (offset axis)Measures 3.5″ in length, 5.70″ in diameter and weighs 3.3 lbs.The Mitsubishi OL-XD2000LZ Long Zoom Lens fits these following Mitsubishi projectors. The aperture range of this projection lens is f/2.1 to f/2.4. The projector’s 1.23x zoom lens has power zoom and power focus capabilities for remote adjustment. The lens weighs 1.5 kg and is 9 cm long. -
Muxlab 500451-POE HDMI Extender Kit
$295.00Add to cartHDMI Extender Kit, PoE, HDBT, UHD-4K 500451-PoE
Overview
The HDMI Extender Kit, PoE, HDBT, UHD-4K (500451-PoE) allows HDMI equipment to be connected up to 131ft (40m) @ 4K/30 (4:4:4) or 4K/60 (4:2:0) resolution, or up to 230ft (70m) @ 1080p Deep Color via one (1) Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. The 500451-PoE-RX is the receiver portion of the kit and is used in conjunction with MuxLab’s HDBaseT Matrix Switches. For installation instructions, please refer to the Matrix Switch Installation Guide. -
Netgear NG48GS Managed Switch
$395.00Add to cartHigh Density
48 10/100/1000 Mbps ports deliver full-speed packet forwarding in a 1U size to migrate your network to future-proof functionality. Four SFP GBIC fiber slots provide optional fiber connectivity for greater distance.Intelligent
Smart Switch capability enables key management features for the value price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization.Right Sized
Ideal for growing businesses who want the benefits of management without the cost. Compatible with Windows, MAC and Linux operating systems.***Easygoing and Durable
Simple to set up and simple to use for effortless network monitoring and troubleshooting. Made to last, this sturdy switch is housed in a 17-inch metal box and comes with a rack-mounting kit.Like all NETGEAR ProSafe Smart Switches, the GS748T is backed by the NETGEAR ProSafe Lifetime Warranty, and 1-Year ProSupport 24×7 Advanced Technical Support*.
-
Panasonic ET-LAE200 Projector Lamp with Module
$295.00Add to cartPanasonic Projector Lamp with Module
The Panasonic ET-LAE200 is a 330 watt lamp and it burns 4,000 hours in ECO mode, as well as 3,000 hours in normal mode.
This Panasonic lamp is compatible with Panasonic PT-EW530, PT-EW530E, PT-EW530ELA, PT-EW530U, PT-EW630, PT-EW630E, PT-EW630EL, PT-EW630U, PT-EX500, PT-EX500E, PT-EX500EL, PT-EX500U, PT-EX500UL, PT-EX600, PT-EX600E, PT-EX600EL, PT-EX600U, PT-EZ570, PT-EZ570E, PT-EZ570EL, and PT-EZ570U projectors.
-
Panasonic ETLAV100 Replacement Lamp
$195.00Add to cartPanasonic ETLAV100 Replacement Lamp – 245 W Projector Lamp – 3000 Hour Normal,
5000 Hour Economy Mode
Products Features
- Product Type: Projector Lamp
- Lamp Life: 3000 Hour, 5000 Hour
- Lamp Power: 245 W
-
Polycom 7230-86040-001 mounting kit
$265.00Add to cartKey Features- Mount STUDIO Above or Below Your Display
- 100 x 100 to 600 x 600mm Mounting
Mount your STUDIO soundbar above or below your display with the Polycom STUDIO Display Mounting Kit. It mounts to displays with 100 x 100 to 600 x 600mm VESA patterns for versatile support. -
RDL RU-VSX4 Video Switcher
$295.00Add to cartRACK-UP® SERIES Model RU-VSX4 4-Input Video Switcher
ï‚· Loop-Through Output from each Input
ï‚· Vertical Interval Switching
ï‚· Local or Remote Control
ï‚· 10 MHz Bandwidth, NTSC or PAL
ï‚· Open-Collector Outputs
ï‚· All Solid-State Switching
