Contact Us

Category

Category

filter by categories

Crown CM31: 195.00 – 2. available Miniature Super-Cardioid Hanging Condenser Microphone (White)

Contact Form

 

The Crown CM-31 is a miniature super-cardioid hanging microphone designed for overhead capturing of choirs, orchestra, stage productions, conferences, lectures and more. The super-cardioid polar pattern is most effective at minimizing noise and ambient signal at the off-axis sections of the microphone capsule, thereby reducing feedback and noise caused by monitor speakers, instruments etc.

The CM-31 provides a smooth, wide frequency response of 40Hz to 20kHz which accurately reproduces audio signal from vocals and instruments. A low-cut filter switch eliminates noise and rumble registered at low frequency ranges. The CM-31 includes a removable hanger and a 30 foot (9.15m) XLR terminated cable.

Compare
Complete Package
The CM-31 consists of two parts: the microphone with a permanently attached 30-foot (9.15-m) cable and the cylindrical electronics power module with low cut switch.
Wide Frequency Response
Smooth, wide-range frequency response for natural reproduction of the singing voice, organ or other musical instruments.
Low-Cut Switch
Includes a low-cut switch which eliminates noise and rumble registered at low frequencies.
SKU: cm31 Category:

Related products

  • Astatic 119LB: clear out 95.00 – 1. available Podium Microphone
    [wpforms id="87" title="true"]
    Key Features
    • Includes 19″ Gooseneck and Flange Mount
    • Gentle High Frequency Rise
    • Low Frequency Noise Filter
    • Cardioid Polar Pattern
    • 5.5′ (1.7 m) Two-Conductor Cable
    • Black

    The Astatic 119LB Cardioid Gooseneck Microphone is designed to accurately capture speech in conferences, lectures, sermons, and general public address applications. The microphone includes a 19″ gooseneck and mounting flange. Also featured is a rubber-mounting ring that supports the element and reduces gooseneck, stand and handling noise.

    Its cardioid polar pattern effectively reduces off-axis and ambient audio that can cause feedback. A multi-stage blast filter protects the microphone element from noise caused by popping, breath and wind. The frequency response accentuates vocals with a slight rise in high frequencies, and a low frequency noise filter. The 119LB includes a 5.5′ (1.7 m) long two-conductor cable. The cable is shielded to reduce noise caused by radio-frequencies and is unterminated for adapting desired connectors, or attaching to public-address amplifiers.

    Read more

  • Shure BETA 53: clear out 225.00 – 1. available Headset Microphone
    [wpforms id="87" title="true"]
    Shure Beta 53 – microphone

    Key Features and Benefits:

    • Comfortable, latex-free earforms that hide behind the ears
    • Thin, non-reflective wireframe that is easily hidden underneath hair
    • Ultra-thin detachable microphone boom mount for right or left positioning
    • Interchangeable frequency response caps
    • Two foam windscreens included
    • Clothing clip for securing cable
    • Corrosion resistant
    • Easy to clean
    • Durable carrying case for protective storage
    Read more

  • Clock Audio Microphone gooseneck C33E: 195.00 – 1. available
    [wpforms id="87" title="true"]

     

    Fully flexible / Semi-Rigid Cardioid Gooseneck Microphone. Terminated with 3 Pin Male XLR.

    • Response optimised for consistent sound quality / Immune to RF artefacts 800-1200MHz.
    • Unobtrusive slimline design.
    • Superior grade components.
    • Engineered in high quality brass.
    • Fully flexible gooseneck shaft / Semi-Rigid Gooseneck shaft.
    • Included is a Phantom Power Adaptor.
    • The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G)
    • Finish: Satin Black or White.
    Read more

  • K&M 259: 95.00 – 2. available Black low profile microphone stand
    [wpforms id="87" title="true"]
    • Two piece telescopic boom arm
    • T-bar locking screw boom arm clamping
    • Clutch height adjustment
    • Socket with foldable leg
    • Steel build with black finish
    • Two piece folding rod combination folding design
    • Die-cast base
    • 3/8” treaded connector
    • 470-775mm boomarm length
    • 425-645mm stand height
    • Weight: 2.06kg
    Read more