Category: -Microphones and Stands

Showing 1–12 of 16 results

  • AKG Microphone Table Shock Mount: 85.00 – 1. available

    [wpforms id="87" title="true"]

    Description

    The H600 shock mount is designed for permanent installation of E and ES version gooseneck modules from the Discreet Acoustics Modular series.

    This mount provides maximum attenuation of structure-borne noise (20 dB). Each mount consists of a durable low profile plastic shell with a flexible inner rubber boot, and, for added security, features a locking clutch that prevents easy removal of the gooseneck module. Included with the H600 is the A608 insert. The A608 grips the narrow section of the gooseneck and allows for custom height adjustments. The H600 requires a 2.1 inch (53 mm) mounting hole.

    Features:
    • Isolation from physical vibration
    • Custom height adjustment
    • Security
    • Rugged design

    Read more
  • Audio-Technica AT8151: 16.00 – 2. available Foam Windscreens for AT898 & AT899 Lavalier Microphones – 3 Pack AT8151

    [wpforms id="87" title="true"]

     

    Audio-Technica AT8151 Foam Windscreens for AT898 & AT899 Lavalier Microphones – 3 Pack AT8151

     

    The Audio-Technica AT8151 is a 3-pack of Black foam windscreens for the AT898 and AT899 lavalier microphones. They fit M29 and M30 Audio-Technica case style(s). They are also available in Beige.

    Compatible with:
    AT898
    AT898c
    AT898cH
    AT898cW
    AT898cL4
    AT898cT4
    AT898cT5
    AT899
    AT899c
    AT899cH
    AT899cT4
    AT899cW

    Read more
  • Audix MicroPod6: 395.00 – 1. available Micro-Gooseneck M1250B Cardioid Mic with 6″ Gooseneck

    [wpforms id="87" title="true"]
    • Type Condenser
    • Polar Pattern Cardioid, Hypercardioid, Supercardioid
    • Frequency Response 50Hz – 19kHz
    • Impedance 150 Ohms
    • Sensitivity @1k 9 mV/Pa (C) / 8 mV/Pa (HC) / 62 mV/Pa (S)
    • Pulpit, podium
    • Conference room
    • Board meetings
    • Courtroom
    • Education
    Read more
  • Clock Audio Microphone gooseneck C33E: 195.00 – 1. available

    [wpforms id="87" title="true"]

     

    Fully flexible / Semi-Rigid Cardioid Gooseneck Microphone. Terminated with 3 Pin Male XLR.

    • Response optimised for consistent sound quality / Immune to RF artefacts 800-1200MHz.
    • Unobtrusive slimline design.
    • Superior grade components.
    • Engineered in high quality brass.
    • Fully flexible gooseneck shaft / Semi-Rigid Gooseneck shaft.
    • Included is a Phantom Power Adaptor.
    • The Phantom Power Adaptor includes filters which will eliminate all cellular frequencies (GSM/2G, 3G, 4G & 5G)
    • Finish: Satin Black or White.
    Read more
  • Crown CM31: 195.00 – 2. available Miniature Super-Cardioid Hanging Condenser Microphone (White)

    [wpforms id="87" title="true"]

     

    The Crown CM-31 is a miniature super-cardioid hanging microphone designed for overhead capturing of choirs, orchestra, stage productions, conferences, lectures and more. The super-cardioid polar pattern is most effective at minimizing noise and ambient signal at the off-axis sections of the microphone capsule, thereby reducing feedback and noise caused by monitor speakers, instruments etc.

    The CM-31 provides a smooth, wide frequency response of 40Hz to 20kHz which accurately reproduces audio signal from vocals and instruments. A low-cut filter switch eliminates noise and rumble registered at low frequency ranges. The CM-31 includes a removable hanger and a 30 foot (9.15m) XLR terminated cable.

    Read more
  • K&M 230/4: 75.00 – 2. available Pro gooseneck desk or stand mount with XLR

    [wpforms id="87" title="true"]
    Key Features
    • Measures 16″ (40.64cm) Long
    • XLR Connector Bushing at Base
    • XLR Plug at Top
    • Features 5/8″ Female and Male Threads
    • Black Finish
    Read more
  • K&M 234: 95.00 – 2.available Table Stand tilting

    [wpforms id="87" title="true"]

     

    K&M Stands’ 234 has a black rectangular cast-iron base with tilt angle adjustment, 2-piece adjustable extension tubing with non-marring height-adjustment mechanism. Ideal for drums and studios. Available in your choice of black or chrome tubing.

    Read more
  • K&M 259: 95.00 – 2. available Black low profile microphone stand

    [wpforms id="87" title="true"]
    • Two piece telescopic boom arm
    • T-bar locking screw boom arm clamping
    • Clutch height adjustment
    • Socket with foldable leg
    • Steel build with black finish
    • Two piece folding rod combination folding design
    • Die-cast base
    • 3/8” treaded connector
    • 470-775mm boomarm length
    • 425-645mm stand height
    • Weight: 2.06kg
    Read more
  • Radial Engineering IceCube: 55.00 – 2. available IC-1 Balanced Line Isolator and Hum Eliminator

    [wpforms id="87" title="true"]

     

    Designed to eliminate hum and buzz cause by ground loops, the IceCube IC-1 Balanced Line Isolator and Hum Eliminator from Radial Engineering can be inserted directly into your signal path via its glass-filled nylon XLR connectors. Its proprietary Eclipse transformer isolates the input from the output and blocks stray DC currents, providing a linear response from 20 Hz to 18 kHz. It can handle up to +10 dB at 20 Hz with less than 0.01% distortion.

    The IceCube is made of solid 16-gauge steel and features a powder-coat finish. The steel provides electromagnetic shielding from nearby cables, motors, and power supplies.

    Eliminates hum & buzz caused by ground loops
    Linear response from 20 Hz to 18 kHz
    Able to handle pro output levels without choking
    Plug & play easy to use with XLR in & out
    Read more