Contact Us

Category

Category

Archives: Products

Showing 169–180 of 270 results

  • PHONIC EAR: clear out 25.00 – 1. available ONWAVE DIRECT DIGITAL SYNTHESIS DDS FM 74MHZ PE 560T TRANSMITTER
    [wpforms id="87" title="true"]

     

    PHONIC EAR ONWAVE DIRECT DIGITAL SYNTHESIS DDS FM 74MHZ PE 560T TRANSMITTER
    Read more

  • Pioneer DJM-3000 DJ mixer: 395.00 – 1. available

    [wpforms id="87" title="true"]About this item

    • 19″ Rack mount 4 Channel Mixer with Effect section. Effects can be automatically synchronized to the BPM of the music.
    • Effect Mix allows DJ to automatically utilize “Echo, Roll or Zip” effect with the Cross Fader plus 7 digital effects and Fader Start.
    • Full range of EQ’s (Hi Mid Lo) and level meters for each channel plus Master Level Meter.
    • Digital outputs allow for connection to Digital PA systems MD, DAT or any other device with digital inputs.
    • Optional Rotary Knob kit available to replace volume faders is available.
    Read more

  • Polycom 2215-07155-001: 149.00 – 2. available Ext Mic Pod Package
    [wpforms id="87" title="true"]

     

    Polycom 2215-07155-001 Microphone for SoundStation

    • Polycom Soundstation VTX1000 Microphone Pods
    • Extend Up To 6′
    • Increases Participants From 15 To 25
    • For use with VTX1000 models
    • Features cardioid microphone operation mode, mute button
    • Includes two expansion microphones and two 6′ cables
    The Polycom 2215-07155-001 extension microphone pods are compatible with SoundStation VTX 1000 and IP6000 systems. They come with two EX mics and two cables of 7′ long.
    Read more

  • Polycom 7230-86040-001 mounting kit: 265.00 – 1. available
    [wpforms id="87" title="true"]
    Key Features
    • Mount STUDIO Above or Below Your Display
    • 100 x 100 to 600 x 600mm Mounting
    Mount your STUDIO soundbar above or below your display with the Polycom STUDIO Display Mounting Kit. It mounts to displays with 100 x 100 to 600 x 600mm VESA patterns for versatile support.
    Read more

  • Polycom HDX Mica: clear out 45.00 – 3. available microphone array
    [wpforms id="87" title="true"]
    The Polycom HDX Mica Microphone Array is an exceptional audio device with unmatched feature and compatibility. I can be used with all HDX conferencing kits. It enables clear conversations without annoying interruptions as GSM cell phone interference is eliminated.

     

    Read more

  • QSC Attero: clear out 395.00 – 1. available Bluetooth Audio Wall Plate Receiver
    [wpforms id="87" title="true"]

     

    QSC Attero Bluetooth® Audio Wall Plate Receiver for Pro-AV

    Features:
    o Single gang Decora form factor for easy installation in space constrained applications
    o Simple pairing one button pairing/connect process for standalone operation with LED indication of connection
    status
    o Simple serial control protocol for integration with 3rd party control system via RS-232 (Remote connection
    management and status monitoring)
    o Configurable pairing button for flexible integration with and without 3rd party control systems
    o Balanced mono/stereo analog outputs for interfacing to both commercial and consumer audio equipment
    o USB bus-powered connection for simple setup prior to installation and firmware update
    (Configuration only – audio output not supported when powered via USB)
    o Customizable advertised friendly name for co-located device applications
    o Compatible with most smartphones, Apple iPads, and Android tablets and laptop Bluetooth® audio devices

     

    Read more

  • QSC K8 Yoke Mount Kit: clear out 95.00 – 3. available 

    [wpforms id="87" title="true"]

    WHAT’S IN THE BOX:

    • QSC K8 Yoke Mount Kit
    • Two Yoke Spacers
    • Four 25mm Screws with Thread Locking Patch
    • Steel Yoke Bracket (Side 1)
    • Steel Yoke Bracket (Side 2)
    • Six 16mm Screws
    • Six Flat Washers
    • Two Nuts
    • Two 25mm Screws
    • Two Split Lock Washers
    • Two Flat Washers
    • One-Year Warranty
    Read more

  • QSC MP-MFC wall mount controller: 295.00 – 1. available

    [wpforms id="87" title="true"]

    Wall mount controller for MP-M Series mixers

    Features

    • For use with the MP-M paging and music mixer/processor only
    • Control zone source selection, zone output level, input level selection and scene recall
    • Crisp 27 mm x 26mm monochrome graphic display and three buttons (increment, decrement, select)
    • Ability to daisy chain up to four MP-MFC controllers
    • Up to 250 m cable length (CAT5)
    • Up to eight MP-MFC controllers per MP-M Series mixer
    • Available in black or white
    • Available in NA and EU sizes
    Read more

  • QSC TSC-7: clear out 750.00 – 1. available W TouchScreen Q-SYS Wall Mnt. Controller
    [wpforms id="87" title="true"]

     

    Features
    Consolidate Dialing and Control: In addition to the dialing functionality for your conferences, this 7 inch screen (800 x 480) can be used to control a myriad of third-party devices prevalent in boardrooms and meeting rooms via the Core (no additional control processor box required). Capacitive Touch Technology: Eliminates physical knobs and buttons increasing product reliability. Single drop PoE cabling: Ethernet connection haves for simplified wire terminations without the need for additional power wiring. Redundancy Options: TSC-7w provides two network ports for connection back to the Q-SYS™ Core. Specifications TSC-7w Display Description Capacitive Touch Surface Panel Dimensions (HWD) 148.5 × 87.5 × 33.7 mm 5.85 × 3.44 × 1.33 in Viewable Screen Dimensions (diagonal) 177.8mm / 7 in Resolution 800 × 480 Brightness 400 nits Connectivity / Power IEEE PoE 802.3af class 3 device via LAN port Barrel Aux power receptacle 24VDC power supply (not included) +12VDC @ 0.5A, locking 2-pos Euro style terminal bloc
    Wallmount Option Yes
    Table Top Option No
    Panel Orientation Horizontal

    Read more

  • Radial Engineering IceCube: 55.00 – 2. available IC-1 Balanced Line Isolator and Hum Eliminator
    [wpforms id="87" title="true"]

     

    Designed to eliminate hum and buzz cause by ground loops, the IceCube IC-1 Balanced Line Isolator and Hum Eliminator from Radial Engineering can be inserted directly into your signal path via its glass-filled nylon XLR connectors. Its proprietary Eclipse transformer isolates the input from the output and blocks stray DC currents, providing a linear response from 20 Hz to 18 kHz. It can handle up to +10 dB at 20 Hz with less than 0.01% distortion.

    The IceCube is made of solid 16-gauge steel and features a powder-coat finish. The steel provides electromagnetic shielding from nearby cables, motors, and power supplies.

    Eliminates hum & buzz caused by ground loops
    Linear response from 20 Hz to 18 kHz
    Able to handle pro output levels without choking
    Plug & play easy to use with XLR in & out
    Read more

  • Rane SL2 Serrato – make an offer – 1. available – 2 deck interface
    [wpforms id="87" title="true"]

    A compact, professional 2-deck, galvanic insulated interface packed with creative features to give DJs a competitive edge. Boasting high quality 48 kHz, 24-bit audio, the Rane SL2 includes inputs for 2deck mixing on turntables or CD decks and two software-switchable analog Thru connections for regular vinyl or CD.

    Read more

  • Rapco Horizon CVPBLOX: 43.00 – 1. available Volume BLOX Volume Control Pad
    [wpforms id="87" title="true"]
    Key Features
    • In-Line Volume-Control Pad
    • Continuously Variable Control
    • Compact and Rugged Design
    • Potentiometer with Knob
    • XLR Input / XLR Output

     

    Read more